Tagged: A50, DVL, output, PD0 Viewing 8 posts - 1 through 8 (of 8 total) Author Posts November 13, 2020 at 22:19 #16410 kevin.tomankaParticipant Hello, Our team is setting up an A50 DVL, and we are trying to get a PD0 string output to interface with our software. In the manual for the A50 it shows PD0 (subset) as a data output option. 1) How is this PD0 output setup 2) What does (Subset) mean as opposed to a standard PD0 string? Any help is appreciated. November 16, 2020 at 16:43 #16416 wlestKeymaster Hi, 1) The PD0 formate is not implemented in the current software release, but it will be added in a future software release. 2) A subset mean that the DVL A50 will provide the standard PD0 string, but some of the data fields will be empty and without data. December 29, 2020 at 12:07 #16663 busav8Participant There was a recent A50 update; is there now a PD0 output? If not when can we expect it? January 4, 2021 at 08:39 #16665 wlestKeymaster Hi, PD0 is not implemented in the latest release. Currently the interest for PD0 has been low and we have therefore prioritized other features before implementing it. Your interest is noted and if there are other which want it implemented please contact support. January 8, 2021 at 19:49 #16686 busav8Participant If it was bought because it was supposed to have a PD0 output but it doesn’t, then it’s no problem sending it back then. January 11, 2021 at 09:31 #16687 wlestKeymaster Please contact us on email@example.com and we will help you out there. January 11, 2021 at 09:31 #16688 wlestKeymaster Please contact us on firstname.lastname@example.org and we will help you out there. January 11, 2021 at 09:31 #16689 wlestKeymaster Please contact us on email@example.com and we will help you out there. Author Posts Viewing 8 posts - 1 through 8 (of 8 total) You must be logged in to reply to this topic. Not a member yet? Registere here!